The car wax you pick is a lifestyle choice that changes from person to person. For aficionados and experts, having a perfect car appearance requires a multi-step car pampering process that can take up to a few days to complete.
However, there are car owners that want to care for their vehicle, but they don’t have the time to dedicate fixing their car. For these people, an easy and fast solution is needed.
Fortunately, car wax products have been made to fulfill both the needs of novice and expert car owners. And in this guide, we’re going to show you how to utilize car wax so that you can maintain the value of your car.
So, let’s get started!
In This Article You Will Learn…
Think of car wax as an additional protective layer for your car. The Car wax is placed on after you polishing and washing the car. Also, car wax acts a form of paint sealant. For instance, if there are any stains or dirt on the paint, your wax will seal it to the car.
One issue that drivers tend to face is the excessive amount of dust that builds on their car. Car Wax prevents pollution such as dust from reaching your car. In addition, it removes moisture; which can cause corrosion if it comes in contact with the paint.
Some people are skeptical about using car wax. They feel that it will damage the car and reduce the quality of the paint. However, you can avoid this issue if you purchase high-quality wax that has natural ingredients.
In reality, using wax is beneficial because it helps increase your car’s lifespan. It takes only a few hours to apply on, and there is a multitude of forms and brands that are available. However, don’t apply too much wax as it will cause damage to the paint. We suggest that you place a thin layer using a soft cloth or a sponge to ensure that its placed on your car evenly.
While some may be opposed to waxing their car, there is a multitude of benefits for doing so. Here are some of the most common benefits you’ll experience once you apply wax onto your vehicle:
While car wax is primarily used to protect and coat your vehicle, it’s also great for creating a slick shine on your car. As a result, car wax makes your vehicle not only attractive to the average person but auto aficionados as well.The more wax that’s applied, the more gloss and shine the finished result will have. As we stated earlier, you have to use a balanced amount of wax on your car. Once the correct amount of wax is applied, you’ll increase the resale value and overall appearance of your car.
Without car wax, your car is vulnerable to chemicals, paint chips, bugs, and other ailments that can destroy your car. If your car doesn’t have wax or another sealant to protect it, chances are your car will become more exposed to these issues over time.
For instance, your car will receive paint chips when you’re driving at high speeds. When doing so, stones and tiny rocks will reach your car and hit the paint. Car wax reduces the friction between the car and the debris. The debris will slide off of the car instead of directly affecting it. Car Wax protects your car from getting hit with rocks which can be costly to repaint fully.
Having a layer of wax makes a barrier between the paint and these contaminants so that they only affect the wax and not the car’s actual paint. Thus, you should get car wax to keep the paint in good condition.
While car wax can’t remove every scratch on your vehicle, it can fill a portion of them in. Wax fills in shallow scratches so that they aren’t noticeable or less apparent. Using wax to fill in scratches is a better alternative than removing them because it doesn’t require you to remove the clear coat from your car.
One reason why car specialists wax their cars is because it makes their cars easier to clean. When your car comes in contact with sap, bugs, and other things that can contaminate your car, the wax prevents it from directly contacting the paint.
You can wipe off the excessive contaminants off with a simple car wash, or they’ll come off when you remove the wax from your car. Without using car wax, you’ll have to get your car fully detailed in order for it to be removed.
Before waxing your car, it’s recommended that you prepare it first beforehand. Doing so allows you to spot for any issues with your car and fix them before they ruin the finished result. Here are the main steps you should take when preparing your vehicle for the waxing process.
First, you’re going to wash your car so that you can get it ready for waxing. While you will polish the car later, you want to same safety techniques that you would when conducting a regular normal maintenance wash.
Before washing, remove any brackets or license plates that are on the car. First, these accessories can hide dirt and get in your way when polishing your car. It takes only a few minutes to uninstall and reapply them. If you don’t, you’ll waste time trying to taping and polishing around them.
Make sure to remove any leaves, bugs, debris, dirt, etc. on your vehicle. All of these contaminants can make the polishing process more difficult. And if there is any more on the surface, it might get caught on your polishing pad and risk damaging your car.
Not only do you have to remove the abrasive debris and dirt from your car, but you also have to make sure that its free from previous grease, sealants, tar, wax, etc. This is because some of the wax products will interfere with the pad and polish.
Some products can make the cleaning process difficult, so we suggest that you check out our buying guide post to see which car wax products will help you the most.
How do you know if your vehicle has an adequate amount of sealant or wax? The easiest way to find out is by spraying the hose surface and seeing if your water bends. If the water has a tight bead, it means that your car is more protected. However, if there is no bead, then you’ll have to apply more wax on the car.
Now that the car is completely clean from sealants and waxes, we’re going to have to clay it to help it maintain its appearance. When washing the vehicle, run your hands through the paint in a multitude of areas to find a gritty feeling. This will show you how much claying is needed.
Just like the cleaning process, claying is important and needs to be taken care of. If the clay gets debris on it, and you don’t knead the clay to show the fresh surfaces, then you’re going to scratch the surface of your vehicle. We recommend that you use a fresh clay bar to clean the surface and remove any contaminants that could destroy your finished result.
Now that we’re done both the cleaning and claying process, it’s time to start taping the vehicle. We need to use tape to protect important edges and materials that might be damaged if they come in contact with the buffer.
When taping your vehicle, protect sharp items that can potentially get stuck with the buffer pad. For instance, rubber can get stained or damaged (window seals), or places where the uneven seams and panels meet, or items that will stick out and be affected by the buffer (mirror sides, door handles, etc.).
Now that you’ve fully cleaned your car and removed any debris from it, its time to polish it. It’s important to find the correct compound formulation for the paint damage you’re attempting to treat.
You can use either Diminishing Abrasive Technology or Super Micro Abrasive Technology which have different methods of removing scratching.
Getting the right applicator (hand polishing) or compounding pads (automatic polishing) is necessary as it sets the right amount of abrasion and pressure to your car’s exterior. Make sure to apply the balanced amount of compound in an even motion to moisten the area.
Once you’ve applied the compound throughout the car, use clean water to rinse out the car’s exterior and then use a towel or a small cloth to dry off the surface.
Then, you’re going to have to buff and wax your car to add extra shine to its exterior. Apply fine polish or wax on the car and use a foam pad or terry cloth to wax the car fully. Give the wax time to dry (no longer than 48 hours) and remove any excess wax off using a microfiber towel.
On some occasions, the paint needs to be placed on a scratched area to remove coat layers that were removed by your compounding agent. After you finished this step, your car will be fully clean!
While there is a multitude of car waves that are in today’s market, there are only a few that you need to understand. For instance, some waxes are natural, which gain their properties fully or partially from plants. Others have a synthetic appeal, using only man-made chemicals. While they both wax your car, each of them has different properties.
See the table below to understand the most common types of car waxes available..
|Car Wax Type||Explanation|
Synthetic Car Wax
Most car waxes are synthetic. They are like natural wax products, but they are made from chemicals. There’s no natural wax in these products, which makes them more of a paint sealant than traditional car wax. Rather than using a paste, synthetic car wax uses either a liquid or spray car wax.
You’ll like how liquid waxes adds shine to your car. They are similar to spray waxes, but they don’t have spray bottles to apply its contents to your car. Dampen the non-scratchy, clean cloth with the product and place it on a thin layer that’s directed by the bottle. Wipe the excessive amount of wax away and buff the car to complete the process.
Paste Wax is one of the oldest forms of car wax. If you want a small jar of wax that you can store in your garage or car for later, you’ll find that paste wax is the best option. For instance, a small container of paste wax can be placed on the body panels and then wiped off. A lot of manufacturers make car waxes, so you’ll be able to find them at online and offline car retailers easily.
People tend to use spray waxes for quick wax jobs. However, they aren’t good substitutes for liquid wax or even paste wax because they wear off quickly. Thus, we suggest that you keep an extra paste or liquid wax product on hand just in case.
Colored wax is used to match multiple paint colors. The main concept is that the wax will fix any paint defects (swirls and scratches). But, most vehicle owners and professional detailers dismiss using a colored wax as another marketing gimmick.
Waxing your car is a good result of preparing the surface and using an effective product. Clay bar and steam clean the surface to take away the contaminants before you apply car polish. Fortunately, you can pick from the different forms of car wax that suits your desires and preferences.
Deciding when your car needs to be waxed can be tricky at first. This is because the shine and protective layer take time to weaken and the differences are impossible to see in the human eye. Here are some factors that you have to consider when planning on waxing your car.
The factor that will determine if you need to wax your car is the environment. For instance, if the car is placed under trees, you need to wax it quickly to prevent it from getting inflicted by the sap. UV Rays, dirt, and smog can potentially harm your car as well, so you need to wax your car if the environment has any of these contaminants.
Second, you want to decide what wax that’s needed for the car. You can choose from a quick wax, which will be easier to apply but will be removed within months. Alternatively, you can use some of the hard waxes, but they might be more difficult to apply on your car.
Third, you want to gauge how old your car is and then decide whether it needs wax or not. Newer cars don’t need wax as much since the paintwork is in good condition and has more shine than older cars. However, if you have a car that’s a few years old, the paintwork might be scratched and dull. Regular waxing and polishing will help the car return to its previous state.
Waxing your car can be a difficult process if it’s your first time. We compiled a list of steps to help you complete the process whether you prefer doing it manually or with the help of a buffer.
Follow these steps so you can apply wax to your car by hand:
Using automotive spray wax is easier than doing it by hand. For instance, it allows you to reduce the time on waxing the car while also giving it a showroom finish. While you can opt for a random orbital buffer, you should take time to familiarize yourself and learn how to use one properly.
Power buffers are typically used on vehicles that have flat, large panels on them. Smaller vehicles that have crevices, cracks, and undulations are harder to buff using an electric buffer. Take these steps in order to learn how to machine wax your car:
When machine waxing, make sure to keep your car in the garage during the process. Working in the sun will cause the wax to dry quickly; which will cause extra problems. Also, waxing your car indoors helps you avoid bird droppings.
Like with any waxing process, you’ll have to wash the vehicle before applying it to the vehicle. Avoid using soapy residues and thoroughly dry the car before placing wax on it.
Place the wax applicator over the electric buffer’s buffer pad. Apply the wax on your vehicle with a large circular motion. Then, apply the wax on the car via turning on the buffer. Don’t put too much pressure on it! Your buffer should smoothly glide across the car. Let the machine work on the car without adding additional pressure. Place the wax in a line and give it time to dry.
Once you are finished applying the wax, take off the applicator from the buffer. Turn the buffer on again and remove the dried wax with long strokes. Don’t buff in a circular motion as you’ll leave swirl marks on the paint. Again, let the buffer work without applying too much pressure and glide the tool. This is an important step when you buff your vehicle.
We believe that car wax is a great way to increase the quality of your car. But, there are a few other things that you’ll need to know beforehand. You’ll need to find the best car wax products available to ensure that your vehicle stays in good condition.
Thus, we invite you to look into our buying guide. We will discuss the top 5 car waxing products that are on the market to help save you the time, effort, and money.